Nozzle Manufacturers Guide You Through Daily Maintenance Instructions for Pick-and-Place Machine Nozzles

2025-11-03

Maintenance for Panasonic CM402/CM602 Pick-and-Place Machine Nozzles

1.Wipe dust off the surface of SMT nozzles with a lint-free cloth.

2.For small-aperture nozzles, unclog them with a fine steel wire and then blow them clean with an air gun.

3.Do not soak the nozzle surface in corrosive solutions such as alcohol, as this may cause surface peeling.

4.Clean the cavity of the HOLDER with a cotton swab; do not damage the filter screen.

5.Apply special grease to the HOLDER claws regularly.

6Perform regular maintenance based on production needs and conduct routine daily maintenance.